Wood-Kare DIY Gelled Wood Stain 1 Quart (0.94L)

Description 
• WOODKARE DIY GELLED STAIN is premium solvent based wood stain in gel form using wiping method to apply on all interior wood products.
• It is use as a colored foundation and it will enriches the natural grain and accentuates the beauty of a wide range of wood.
• Available in 45 permanent, non-fading colors. 

Benefits/Features 
• Easy to apply, fast drying.
• Compatible with all type of solvent / water based lacquers (PU, NC, AC, ACRYLIC)
• No stirring required.
• Never peel and blister.
• 2 times more coverage than liquid stain.
• Does not raise the wood grain.
• Leave no wiping or lap marks.

Recommended Uses 
Ideal for
• Timber door and frame
• Furniture
• Hard board
• Moulding
• Veneer
• Wall paneling and etc

Specification / Sheen 
• Appearance: Coloured gel or neutral Matte

Packing: 1 Quart

Coverage: 280 to 320 sq.ft. / quart per coat

Tools / Clean up
• Lint free cloth or sponge
• Clean up with turpentine

Application 
• Getting Started: Prepared the necessary tools. Clean the wood thorougly making sure it is free of wax or other contaminants.
• Fill cracks and holes: Fill cracks or holes with OTTER Wood Filler of similar or nearest colour to the wood. Let dry and sand lightly to get an even surface. Cleaning away sanding duct.
• Apply Gel Satin: Wipe on WOODKARE DIY "GELLED" STAIN in circular motion with a sponge or lint-free cloth. Spread as far as possible to fill up the wood pores evenly, always in the direction of the wood grain.
• Remove Excess: Wipe off excess immediately with a dry cloth. Wipe in the direction of the wood grain to obtain a smooth and evenly distributed finish. Leave to dry for about half an hour.
• Apply Sanding Sealer: Brush on 1 coat of WOODKARE Crystal Clear Sanding Sealer.Leave dry and sand lightly with 280-320 grit sandpaper.
• Apply Top Coat: For interior use, brush or spray on 2-3 coats of WOOD-KARE Crystal Clear Top Coat. Leave dry and sand lightly between coats with 280-320 grit sandpaper. Finish available: Gloss, Satin, and Matt.
Note: You may add a small amount of WOODKARE DIY "GELLED" STAIN into sanding sealer or top coat to touch up the uneven wood color tone, if any.
 

Caution: Keep away from children.

Disclaimer 

All product images shown are for illustration purposes only. Actual products may varies in term of size, type, brand, version, colour, and other relevant characteristics.