Menu
Your Cart
FREE SHIPPING OVER RM500
CALL US NOW

Wood-Kare DIY Gelled Wood Stain 20L

Tags: Wood-Kare , DIY Gelled Stain

Wood-Kare DIY Gelled Wood Stain 20L

This product qualifies for free shipping
Please check our free delivery coverage area. Terms & Conditions Apply*
Based on 0 reviews. | Write a review
RM1,200.00
Price in reward points: 480000
Products Sold: 0
Product Views: 5027
Add to Cart
Send Inquiry
Click to share this page to your friends & families and start earning. Affiliate

Description 

  • DIY Gelled Stain is unlike any liquid stain, varnish or shellac you ever used. It is gel form and very easy to apply. To use as a colored foundation compatible with all type of lacquer, P.U., A.C. and Acrylic etc. Ideal for wood, fiberglass, metal and composite doors, Use on furniture cabinets, moulding veener and wall paneling. Available in 45 permanent, non-fading colors.. 

  

Application 

  • Surface should be free from finish wax or contaminates.. 
  • To smooth wood surface usnig 280 or 320 grit sand paper.. 
  • Always sand according to the direction of the grain,this will not damage the grain. Give a matte sheen finish.. 
  • Just rub DIY Gelled Stain by using lint free cloth or sponge spreading as far as possible to fill the wood pores evenly.(To add mineral spirit or turpentine liquid to dilute the stain if it is too thick).. 
  • Only one coat is required.. 
  • Wipe off excess stain immediately with clean lint free cloth in the direction of grain.. 
  • Wipe until smooth,, evenly distributed, color achieved then no more sanding is required,. 
  • Wait at least 1 hour to dry.. 
  • To make surface smooth and gloss, apply 2 coats of Crystal Clear Lacquer sealer and 2 coats Top Coat (Gloss or Matte Finishes) or Otter H2O based Polyurethane finish,. 

  

Benefits/Features 

  • Easy apply, rub, wipe clean with lint free cloth (T-shirt). No skilled labor required). 
  • No grain raising, no dripping. 
  • No wiping marks or lap marks. 
  • No stirring - color very consistency from top to bottom. 
  • Top coat in an hour, set to touch in 20 minutes. 
  • Fade resistance, never peel or blister. 
  • Economical to use - 3 times coverage than shellac or varnish.. 
  • Ideal for wood, fiberglass, metal and composite doors, Use on furniture, cabinets, moulding, veneer and wall paneling.. 

  

Coverage 

One application can cover 280 to 320 sq.ft per litre or (26 sqm to 29 sqm), depending on the porosity of the surface. 

  

Packing 

Available in 1/3 quart,1 quart, 1 gallon, 5 gallon 

  

Caution: Combustible and keep away from children 

  

Disclaimer 

All product images shown are for illustration purposes only. Actual products may varies in term of size, type, brand, version, colour, and other relevant characteristics.