W&H Crack-Seal Compound Indoor 1KG

Main Components 

• Polymer emulsion. 
• Inorganic aggregate filler. 
• Dispersing agent. 

Product Characteristics 

• The product line is non-toxic, non-polluting, and environmentally friendly, it does not pose any safety threats and does not cause any harm to the human body and the environment.. 
• The product possess elasticity and adhesive properties, it is able to withstand minor oscillation and compression.. 
• The product's surface capillary pores look similar to the coating, therefore the patch does not look obvious after being painted over.. 

Scope of Application 

• Movement cracks of wall structures. 
• Gaps between wooden doorframes and brick walls. 
• Cracks at joints between beams and brick walls. 

Application Method 

• Wipe the crack with a wet sponge to ensure there is no dirt to impair adhesion.. 
• Use a small spatula to apply the product with stokes across the crack to fill it up, this is followed with strokes along the gap to level the filling.. 
• Wipe with a wet sponge to remove any parts that are out of line.. 

*Recommendation: If cracks are less than 1.5mm across, please widen it with a small nail. If shrinking occurs, please re-fill after 3 hours. 

Note 

• After cracks in external walls are repaired, please brush on base coat as soon as possible to protect from direct contact with rain.. 
• If the crack is too large, fill with Crack Seal mixed with cement.. 
• If the wall surface is applied with Sking Coat, or if the crack is flaking or is not compact, it can be first brushed with latex diluted with water. When the surface of the infilltration cures, filling can then be done.. 

Disclaimer
All product images shown are for illustration purposes only. Actual products may varies in term of size, type, brand, version, colour, and other relevant characteristics.