Menu
Your Cart

V-Tech VT-212 Sanitary Sealant Neutral Silicone Sealant 300ML - Clear/ White

V-Tech VT-212 Sanitary Sealant Neutral Silicone Sealant 300ML - Clear/ White

RM14.44
Price in reward points: 5600
Products Sold: 0
Product Views: 2324

Available Options

Add to Cart
Click to share this page to your friends & families and start earning. Affiliate

Description

VT-212 Sanitary Sealant is a silicone sealant with excellent resistance to weathering, UV radiation, vibration, moisture, ozone, temperature extremes, airborne pollutants, and many cleaning detergents and solvents. It is a single-component elastomeric sealant that is permanently elastic upon curing and has a movement capability of ±25 %.

Specially formulated to achieve mildew resistance and low VOC, VT-212 complies with the stringent requirements of SCAQMD rule #1168 (Architectural Sealant) for low VOC, and has been tested against ASTM G21.

 

Features

  • Neutral curing system
  • Antifungal
  • ±25 % movement capability
  • Low VOC compliant
  • Permanently flexible
  • Indoor and outdoor use

 

Specification

  • Base: Silicone polymer
  • Physical State: Non-sagging paste (Before cure) / Elastic rubber (After cure)
  • Color: Clear/ White
  • Tack-Free Time: 10 – 30 minutes (at 25 °C & 50% R.H.)
  • Packaging: 300ml

 

Application

  • Well-suited for use in damp areas such as toilets and kitchens where fungal growth on sealants is prevalent.
  • Widely used to seal shower enclosures, bathtubs, sinks, etc.

 

Preparation

  • Substrate surface must be dry and clean; free of dirt, grease, oil, or standing water.
  • For a neat finishing, use masking tape and remove within the working time.
  • 602 Primer is recommended especially for porous substrates such as concrete for excellent adhesion.
  • For sealant designs with depth of over 10 mm, use approved backing materials.

 

Application Direction 

  1. Cut the cartridge tip carefully.
  2. Cut the nozzle into an appropriate diameter at an angle of approximately 45° to 60°.
  3. Use a caulking gun and extrude the sealant with a single bead.
  4. Tool the sealant bead with a clean and dry tool within the working time for a smooth finishing.

 

Caution

  • Product releases methylethylketoxime.
  • May cause an allergic skin reaction.
  • Avoid breathing dust / fume / gas / mist / vapours / spray.
  • Wear protective gloves / protective clothing / eye protection / face protection / hearing protection.
  • Specific treatment. If skin irritation or rash occurs: Get medical advice / attention.
  • Take off contaminated clothing and wash it before reuse. Safety data sheet available on request.
  • For further health and safety information, consult the latest safety data sheet.

 

 

Disclaimer
All product images shown are for illustration purposes only. Actual products may vary in terms of size, type, brand, version, color, and other relevant characteristics.