V-Tech VT-232 Eco Nails Construction Adhesive Sealant 350GM
V-Tech VT-232 Eco Nails Construction Adhesive Sealant 350GM
- Brand V-Tech
- Model: VT-232
Description
• VT-232 is a one-component, paste-like construction adhesive sealant formulated to bond a variety of common construction materials.
• Specially formulated to achieve superior performance and be environmental friendly (APEO, Formaldehyde and Phthalate free) and complied with the stringent requirements of the Leadership in Energy and Environmental Design (LEED) v4.1 credit and stringent requirements of Singapore Green Building Product Labelling Scheme.
• Vt-232 has a strong initial grab, superior adhesion and will not slump on vertical surfaces.
• It is suitable for heavy-duty general construction, remodelling, maintenance and repair projects.
Features
• Certified Green Adhesive
• Low VOC
• APEO-, Formaldehyde- and Phthalate- free
• Non-drip paste
• Strong initial grab
• Bonds most materials
Specification
• Base: Synthetic rubber
• Physical State: Thick paste
• Colour: Light Brown
• Open Time: Max. 5 minutes (at 25 °C & 50% R.H.)
• Curing Time: 24 – 72 hours
• Packaging: 350 g/cartridge (24 cartridges/carton)
• Shelf Life: 18 months (cartridge)
• Storage: Store in a dry and cool place with temperature around 30 °C
• Application Temperature: -20 °C – 38 °C
• Service Temperature: -30 °C – 60 °C
• Curing system: Solvent evaporation
• Specific gravity: 1.22 g/mL
• Lap shear strength: 4.0 MPa ASTM D1002 (Wood-to-wood)
• Solid content: 70 %
• Freeze/Thaw stability: 5 cycles
• Low VOC compliance: Yes SCAQMD Rule 1168
• VOC content: 18.06 g/L USEPA Method 24
• Pedestal overturning moment: 170.52 N/m CISCA 2007 – Section 6
Application
• Ideal for bonding of skirting boards of wood and PVC, particleboard, masonry, aluminium, galvanized iron, steel, concrete, fibrous cement sheeting, wall brick, concrete and floor panels.
• It is recommended for bonding pedestals of raised access floors to cement floor screed, whereby the adhesion in this application is shown excellent in CISCA 2007- Section 6: Pedestal Overturning Moment Test.
Application Direction
1. Surfaces must be clean, dry and free of dirt, grease, oil or water.
2. For a neat finish, apply masking tape and remove it before construction adhesive skins over.
3. Cut tip off and puncture the internal foil seal with nozzle. Cut nozzle at 45° angle to desired bead-width and apply to substrate with cartridge gun.
4. Two-way contact (Lighter substrate bonding): Apply adhesive onto substrate to be bonded, press firmly, and pull apart. Allow to tack-off for 10 to 30 seconds and press firmly together again. Contact areas should be tapped with a rubber mallet to ensure intimate contact.
5. One-way method (Heavier substrate bonding): Apply adhesive onto substrate to be bonded, press firmly, and securely fasten them together (clamp, nail, screw, etc.). Retain fastening for a minimum of 24 hours.
6. Any wet or partially wet adhesive can be removed with a piece of cloth. Dried adhesive is best removed with scraper or by sanding.
7. For raised floor pedestal: Apply adhesive of 2 - 4 mm thickness to the pedestal base with a scraper. Place the pedestal onto floor with a twisting motion. Adhesive oozed out from pedestal should not exceed 5mm. Do not reposition the pedestal after adhesive is applied for >15 minutes.
Caution
• Highly flammable liquid and vapour.
• May cause an allergic skin reaction.
• Causes serious eye irritation.
• May cause drowsiness or dizziness.
• Harmful to aquatic life with long lasting effects.
• Keep away from heat, hot surfaces, sparks, open flames and other ignition sources.
• No smoking. Avoid breathing dust / fume / gas / mist / vapours / spray.
• Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.
• Call a POISON CENTRE or doctor if you feel unwell.
• Specific treatment (see supplemental first aid instruction on this label).
• If skin irritation or rash occurs: Get medical advice/attention.
Disclaimer
All product images shown are for illustration purposes only. Actual products may vary in terms of size, type, brand, version, color, and other relevant characteristics.