Menu
Your Cart

Sikagard 703 Groutseal Water Repellent Impregnation For Tiles Joints & Building Surface 1L

Sikagard 703 Groutseal Water Repellent Impregnation For Tiles Joints & Building Surface 1L

RM39.00
Price in reward points: 15600
  • Brand Sika
  • Model: SK-703-1L
Products Sold: 11
Product Views: 3916
Add to Cart
Click to share this page to your friends & families and start earning. Affiliate

Description 
Sikagard  703 Groutseal is an low viscosity emulsion, ready to use, silane / siloxane combination based, water repellent impregnation design to deeply penetrate to any hairline cracks in tiles joints / concrete. 

  

Characteristics / Advantage
▪ Product in aqueous phase with strong water repellent capability.
▪ Penetrate deeply into tiles joints / building surface to provide water resistance properties.
▪ Treatment is usually invisible not changing the substrate aspect.
▪ Improve resistant to dirt pick up and reduces fungal and algal growth.
▪ Can be over coated with suitable paints and coatings.
▪ Ready to use.
▪ Water based environmental friendly.

 

Specification
Product Information
▪ Composition: Silane / Siloxane combination
▪ Packaging: 1 L pail
▪ Appearance / Colour: Whitish liquid
▪ Shelf Life: 12 months from date of production
▪ Storage Conditions: Store properly in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +40 °C.
▪ Density: 1.0 kg/l (at 20 °C)
▪ pH-Value: 7–10
Application Information
▪ Consumption: Dependent on substrate quality and porosity:
   - On concrete and mortar: 0.15–0.20 kg/m²
   - On porous material: 0.30–0.50 kg/m²
▪ Ambient Air Temperature: +5 °C min. / +35 °C max.
▪ Substrate Temperature: +5 °C min. / +35 °C max.
▪ Waiting Time / Overcoating:
   - Can be overcoated with water / solvent based polymer paint – contact the paint manufacturer for details.
   - For Sikagard® polymer paint, wait at least 5 hours before apply the paint.
▪ Curing Treatment: Sikagard®-703 GroutSeal does not require any curing but must be protected from rain for at least 3 hours at +20 °C.

 

Uses
▪ For making tiles joints / building surfaces water repellent and protecting against water ingress.

 

Application
▪ Sikagard®-703 GroutSeal is applied using a low-pressure spray gun, brush or roller, in a single layer from top to bottom, taking care not to let the product run.

 

Important Considerations
▪ Cement based substrate must be at least seven days old.
▪ Protect glass surfaces and aluminium frames (possibility of surface damage / staining).
▪ Test on a sample surface before use.
▪ Cannot be over coated with limewash or cement paint.
▪ On any substrates, the optimum water repellent capability is achieved after a few days.
▪ Water repellency is reduced significantly when the substrate is heavily cracked.

Product Data Sheet (PDS)

 

     

    Disclaimer
    All product images shown are for illustration purposes only. Actual products may varies in term of size, type, brand, version, colour, and other relevant characteristics.