PYE Grout Waterproof Tile Grout 20KG (WHITE)

Description

PYEGROUT is a protective waterproof dense cement mixture used to fill the joints of mosaic, ceramic and other similar tiles. When mixed with water, it produces a smooth non-shrinking hard joint. It provides an attractive appearance and prevents the ingress of water behind the tiling surface. It is resistant to fungus and mould growth.

Technical & Physical Data

• Colour: White, Grey

• Packaging: 1kg, 5kg, 10kg, 20kg

• Adhesion: Excellent adhesion to concrete, masonry, and asbestos cement

• Drying time: 1 – 2 hours under normal conditions

• Coverage: Approx. 2sq.m. of tiles per kg

• Cleaning: Clean all equipment with water before setting occurs

Suitable For

Use in the tiled areas of kitchens, shower recesses, toilets, walls and floors. It is suitable for both interior and exterior use.

Directions For Use

1. Surface preparation
Allow the tile adhesive to cure for 24 hours before grouting. On non-porous backings, the time interval should be extended to a minimum of 3 days. For exterior work, it is important that water is not allowed to penetrate the open joints before grouting commences.

2. Mixing
Add sufficient water and mix to a thick uniform, creamy consistency. Allow standing for 5 - 10 minutes and re-stir before use.

Application

• Grout tiles after the adhesives have had sufficient time to set.

• Dampen the tile joint with a sponge and apply the prepared grout, spreading at the rate of 3m at a time.

• Work well into joints with a sponge, grouting tools or squeegee.

• Remove surplus grout with a piece of damp cloth or sponge.

• Allow grout to set firm (approximately one day).