Pentens T-100 Pro Water-Based Bituminous PU Waterproofing Coating 5KG

Description
PENTENS T-100 Pro is a single component water-based bitumen PU emulsion containing fine aggregate, filler, and fiber. PENTENS T-100 Pro is specially formulated to produce a tough, flexible, trafficable, and durable bituminous film when dry.

Features
• Water-based bitumen PU emulsion containing fine aggregate, filler, and fiber.
• Specially formulated to produce a tough, flexible, trafficable, and durable bituminous film when dry.

Benefits
• Easy to apply.
• Superb adhesive strength.
• Abrasion-resistant.
• Good waterproofing properties.
• Capable of re-application.
• Non-flammable.
• High thermal stability.
• Extra aggregate/filler add-on-site possible.
• Chemical resistant to alcohol, most salt solutions, some dilute acids, and some alkalis.
 

Specifications
• Form: Emulsion
• Color: Dark Brown
• Density: 1.01 kg/liter
• Solid Content (%): approx. 55%
• Elongation at break (%) (ASTM D 412-98): >350%
• Application Temperature: 5ºC ~ 40ºC
• Service Temperature: -10ºC ~ 85ºC
• Full Dry Time: 24 hours
• Tack Free Time: 30 - 60 mins
• Overcoating: 8 hours
• Chemical Resistance (10% HCOOH, 60ºC, 24hrs): No changes on the surface of the sample.
• Shelf Life: 1 year when unopened and undamaged
• Storage Condition: Store in a dry cool place
• Packaging: 5 kg/pail

Uses
• Bathrooms
• Terraces and balconies
• RC flat roof
• Retaining walls
• Suspended floors
• RC gutters and planter boxes
• Swimming pools and water features
• Driveway
• Basements and foundation
• Landscape area

Instruction of Use: 
Surface Preparation
• All the surfaces must be clean, free from grease, oil, laitance, and remove all the dirt and contaminants, which might affect adhesion.
• ​​​​​​​The impurity outside the structure body should be cleaned thoroughly.

Application:
With a brush, roller, trowel, or spray method apply PENTENS T-100 Pro on the application surface.

Important Notes
• PENTENS T-100 PRO is not resistant to oils, solvents, and some detergent solutions.
• Never apply more than 2mm (wet film thickness) in one single layer.
• Apply only to clean, sound substrates where surfaces should be well dampened but free of surface water and leaks.  

Safety
• Impervious gloves and barrier cream should be used when handling these products.
• Eye protection should be worn.
• If contacts with eyes occur, rinse immediately with plenty of water and seek medical advice if symptoms persist.
• If contact with skin occurs, it must be removed before curing takes place.
• Wash off with an industrial skin cleanser followed by plenty of soap and water.
• Do not use solvent.
• Ensure adequate ventilation when using these products.

Disclaimer

All product images shown are for illustration purposes only. Actual products may vary in terms of size, type, brand, version, color, and other relevant characteristics.