Pentens Easycoat WP1+ One Component Water-Based Flexible Cementitious Waterproofing 22.5KG

Description 
PENTENS EasyCoat WP1+ is a one-component water-based flexible cementitious waterproofing system and easy to apply. As the intermediate coating of waterproof material. Have leveling effect for the work surface is not flat such as crack, gap. Increase the thickness of the waterproofing layer, strengthen the work surface.

Features
• One-component water-based flexible cementitious waterproofing system and easy to apply.
• Coating of waterproof material.
• Have leveling effect for the work surface is not flat such as crack, gap.
• Increase the thickness of the waterproofing layer, strengthen the work surface.

Benefits
• Easy to apply, can be directly coated on the damp surface.
• High flexibility.
• High water resistance.
• Low water absorption.
• Non-toxic.
• Excellent adhesion to brickwork, concrete/ masonry, other cement bound surface.
• Permeable to water vapor.
• Ultimate weather resistance.

Specifications
• Tensile Strength (kgf/cm)(ASTM D412 (Die C): >13
• Elongation (%)(ASTM D412 (Die C): >150
• Tear Strength (kgf/cm)(ASTM D624): >10
• Hardness (Shore A)(ASTMD624): >4
• 100% Modulus of Elasticity(kgf/cm) (ASTM D412 (Die C): 13
• Shear Strength (kgf/cm)(ASTM D1002): 7.2
• Water Absorption (%)(ASTM D1002): <0.50
• Puncture (kgf): 9
• Shelf Life: 12 months when unopened
• Storage Condition: Store in a dry, cool place
• Color: Cement Grey
• Application Temperature Range (°C): 5 to 45
• Service Temperature Range (°C): 5 to 50
• Packaging: 22.5kg /pail
• Catalogue(PDF)

Uses 
• Bathrooms, toilets, and kitchens. 
• Roofs and balconies. 
• Water tanks. 
• ​​​​​​​Suspended floors. 
• ​​​​​​​RC gutters. 
• ​​​​​​​Floor slabs. 
• ​​​​​​​Basements and fountains. 
• ​​​​​​​Retaining walls. 
• ​​​​​​​Swimming pools and fountains. 
• ​​​​​​​Crack sealer. 
• ​​​​​​​Protective coating.

Instruction for Use:
Surface Preparation
• All surfaces, joints between slab and wall must be clean, free from grease, oil, laitance, dirts and contaminants which might affect adhesion.
• Any cracks and water leakages should be pre-treated and reinforced before the waterproofing.

Method of Statement:
• Apply T-007 as a primer layer.
• Mix thoroughly. (Can add 3-5% clean water to mix container)
• Apply directly to construction surface by using brush, roller or spray method.
• Finish with cement screed or tile.
• Complete.​​​​​​​

Application
• Dilute 1 portion of PENTENS T-007 permeable primer with 3 portions of clean water and then apply directly to the surface to be waterproofed to improve the bonding.
• It is recommended to apply PENTENS EASYCOAT WP1+ in at least 2 coats. The first layer of coating should be applied in one direction only. If possible, the second layer should be applied at right angle to the first.
• Apply the first and finishing coats of PENTENS EASYCOAT WP1+ to construction surface by using brush, roller or spray. The time interval between coats should be 6 ~ 8 hours and make sure that the first layer of coating is dry and formed as membrane before applying subsequent layer.
• For more details, please refer to PENTENS Technical Department.

​​​​​​​Important Notes
• The material must be stored indoor to avoid being exposed to direct sunlight, wind or rain.
• Keep the material away from fire or smoke.

​​​​​​​Safety
• As cement is alkaline and may cause irritation, wear gloves and goggles when using PENTENS EASYCOAT WP1+.
• In case of contact with eyes, rinse immediately with clean water and seek medical advice if symptoms persist.
• Safety As cement is alkaline and may cause irritation, wear gloves and goggles when using PENTENS EASYCOAT WP1+.
• In case of contact with eyes, rinse immediately with clean water and seek medical advice if symptoms persist.

Disclaimer
All product images shown are for illustration purposes only. Actual products may vary in term of size, type, brand, version, colour, and other relevant characteristics.