Pentens T-100 Water-based PU Bituminous Waterproofing Membrane 5KG

Description 
PENTENS T-100 is a single component, a newly developed polymer of MMA, natural rubber, and polyurethane combined with asphalt and then modified and further emulsified to form an elastic waterproof membrane. PENTENS T-100 is an environmentally friendly and low VOC material. 

Features
• Single component, a newly developed polymer of MMA, natural rubber, and polyurethane combined with asphalt and then modified and further emulsified to form an elastic waterproof membrane.
• Environmentally friendly.
• Low VOC material. 

Benefits
• Low VOC & Non-formaldehyde.
• Environmentally friendly.
• High elasticity.
• Will bond to most surface.
• Does not run or creep under heat.
• Resists to a wide range of acids and alkalis.
• Can be applied directly on damp or wet surfaces.
• Odourless and produces no fumes.
• Non-toxic.
 

Specifications
• Form: Liquid
• Colour: Black Coffee
• Solid Content (%)(SS 133:1987 Appendix D): 73.90
• Shore A Hardness (ASTM D2240:2005): 57
• Crack Bridging (ASTM C 835:00): 2mm
• Tensile Strength (N/mm²) (ASTM D 412-98): 3.1
• Elongation at Break (%) (ASTM D 412-98): 1128.6
• Tear Strength (kgf/cm²) (CNS 6986, CNS 6988): 14.7
• Water Penetration (DIN 1048 Part 5:1991): 0
• Water Vapour Transmission of Materials (ASTM E96/ E96M:2005): 18 g/m²/24 hrs
• Puncture (kgf) (ASTM E154): 19
• Chemical Resistance (10% HCOOH, 60˚C, 24 hrs): No Changes on thesurface of the sample
• Shelf Life: 1 year when unopenedand undamaged
• Storage Condition: Store in a dry, cool place
• Packaging: 5kg
• Catalogue(PDF)

Areas of application include:
• Basement. 
• RC flat roof. 
• Floor slabs. 
• Patios. 
• Terraces. 
• Balconies. 
• Internal wet area. 
• RC gutter. 
• RC planter box. 
• Lift pit. 
• Retaining walls. 
• Swimming pool. 
• Fountain. 

Uses 
To provide better water and vapour proof in complicating application surface compare to membrane-type and ensure better integrity between applied surfaces and waterproofing coating.

Method of Statement
1. Apply T-007 as a primer layer.
2. Open the cover of T-100.
3. Mix thoroughly.
4. Apply directly to construction surface by using brush, roller or spray method.
5. Finish with cement screed or tile.
6. Complete.

Disclaimer
All product images shown are for illustration purposes only. Actual products may vary in term of size, type, brand, version, colour, and other relevant characteristics.