Pentens AB-Brush Cementitious Waterproofing Slurry (5.5KG + 17.0KG) 22.5KG
Pentens AB-Brush Cementitious Waterproofing Slurry (5.5KG + 17.0KG) 22.5KG
- Brand Pentens
- Model: PT-ABBR-22.5
Description
PENTENS AB BRUSH is a cement based waterproofing coating incorporates 2 polymer components. Apply directly to concrete to prevent water infiltration & low VOC. PENTENS AB BRUSH can be used: potable water tanks, basements, retaining walls, seawalls, terraces and balconies, RC gutters, bathroom floors and walls, swimming pool.
Features
• Cement based waterproofing coating incorporates 2 polymer components.
• Apply directly to concrete to prevent water infiltration & low VOC.
• Used: potable water tanks, basements, retaining walls, seawalls, terraces and balconies, RC gutters, bathroom floors and walls, swimming pool.
Benefits
• Low VOC.
• Environmentally friendly.
• Pre-batched and ready for used.
• High workability.
• Good adhesive to sound substrate.
• Can be applied directly on damp or wet surface.
• Impermeable..
• Frost and salt resistance.
• Resist carbon dioxide penetration.
• Slightly flexible.
• Capable of re-application.
• Non-toxic.
Specifications
• Tensile Strength (kgf/cm2)(ASTM D412 (Die C): 8.3
• Elongation (%)(ASTM D412(Die C): 20
• Tear Strength (kgf/cm)(ASTM D624): 7.20
• Hardness (Shore A)(ASTM D2240): 54
• 100% Modulus of Elasticity(kgf/cm2)(ASTM D412 (Die C): 5.80
• Shear Strength (kgf/cm2)(ASTM D1002): 4.70
• Compressive strength @28 days (n/mm2)(ASTM E154): >40
• Pot Life: 30 min at 30˚C and will be shortened at higher temperatures
• Shelf Life: 12 months when unopened
• Storage Condition: Store in a dry cool place
• Packaging:
- Part A: 5.5kg /pail
- Part B: 17kg /bag
• Catalogue(PDF)
Areas of application include:
• Potable water tanks.
• Basements.
• Retaining walls.
• Seawalls.
• Terraces and balconies.
• RC gutters.
• Bathroom floors and walls.
• Swimming pool.
Method of Statement
1. Apply T-007 as a primer layer.
2. Add resin (part A) to an empty pail.
3. Add powder (part B) to mix.
4. Mix thoroughly.
5. Apply directly to construction surface by using brush, roller or spray method.
6. After 2 layers cover with cement render.
Disclaimer
All product images shown are for illustration purposes only. Actual products may vary in term of size, type, brand, version, colour, and other relevant characteristics.