Pentens AB-Bond Cementitious Waterproofing Coating (1KG + 5KG) 6KG

Description 
PENTENS AB-BOND  is cement based waterproofing coating incorporates 2 polymer components. Apply directly to concrete and mortar to prevent water infiltration. 

Features
• Cement based waterproofing coating incorporates 2 polymer components.
• Apply directly to concrete and mortar to prevent water infiltration.

Benefits
• Low VOC.
• Environmentally friendly.
• Pre-batched and ready for used.
• High workability.
• Good adhesive to sound substrate.
• Can be applied directly on damp or wet surface.
• Impermeable.
• Frost and salt resistance.
• Resist carbon dioxide penetration.
• Slightly flexible.
• Capable of re-application.
• Non-toxic.

Specifications
• Tensile Strength (kgf/cm2)(ASTM D412 (Die C): 8.3
• Elongation (%)(ASTM D412(Die C): 24.30
• Tear Strength (kgf/cm)(ASTM D624): 7.20
• Hardness (Shore A)(ASTM D2240): 54
• 100% Modulus of Elasticity (kgf/cm2)(ASTM D412 (Die C): 5.8
• Shear Strength (kgf/cm2)(ASTM D1002): 4.7
• Water Vapor Transmission of Material
   i. WVT(g/hxm2)(23˚C,50%)- ASTM E96: 37
   ii. Permearce (g/sxm2xPa)- Method B: 1.98 x 10⁻5
• Abrassive Test (g) Taber CS-17, 1000g, 1000 Cycles (ASTM C501): 0.043
• Puncture (kgf): 9
• Compressive strength @28 days(n/mm2)(ASTM E154): >40
• Pot Life: 30 min at 30˚C and will be shortened at higher temperatures
• Shelf Life: 12 months when unopened
• Storage Condition: Store in a dry cool place
• Packaging:
   - Part A: 1kg
   - Part B: 5kg
• Catalogue(PDF)

Areas of application include: 
• Potable water tanks.
• Terraces and balconies.
• RC gutters.
• Bathroom floors and walls.
• Basements.
• Retaining walls.
• Seawalls.
 

Method of Statement
1. Apply T-007 as a primer layer.
2. Open the cover of AB-BOND. (have 1kg pail resin inside).
3. Add resin (part A) to a empty pail. Add 0.7kg clean water to mix container.
4. Mix with cement powder.
5. Mix thoroughly.
6. Apply directly to construction surface by using brush or roller.