Jotun Paint Woodshield Deck Forest Walk Series (Gloss Colour) 1L
Jotun Paint Woodshield Deck Forest Walk Series (Gloss Colour) 1L
- Brand Jotun Paint
- Model: JT-WDFW-G1L
Description
• Woodshield Deck is the ultimate protection for wood surfaces that are exposed to the elements as well as frequent wear and tear. It provides a touch, scratch resistant film that is flexible eough to meet wood expansion and contraction requirements.
- Excellent Paint Adhesion
- Anti Efflorescence & Anti Discolouration
- Suitable For Fresh Concrete
- Anti Fungal
- Water Resistance
• Woodshield Deck offers the very best protection for wood surfaces in your home.
Specifications
• Packaging size: 1L
• Colours: As per colour card and available in Jotun Multicolor tinting system.
• Solids: 38 ± 2 volume%
• Flash point: Closed cup: 46°C (114,8°F)
Application data
• Remarks: Handle with care. Stir well before use.
• Application methods: By brush or roller.
• Conditions during application
- The moisture content of the substrate should be low as high moisture content in the substrate is the common cause for premature paint failure.
• Recommended film thickness per coat
- Dry film thickness: 25 - 35 microns (μm)
- Wet film thickness: 67 - 94 microns (μm)
- Film thickness will vary and is calculated as average.
• Spreading rate per coat
- Theoretical Spreading rate per coat (m²/l): 10.8 - 14.8
- Spreading rate depends on film thickness applied, type of texture, surface porosity, imperfections, temperature, wastage during painting etc.
• Thinner: Gardex Thinner
• Dilution: The paint is ready to use after proper stirring. If thinning is required, Jotun Gardex Thinner may be added up to a maximum of 5%.
• Drying times
Drying times are generally related to air circulation, temperature, film thickness and number of coats, and will be affected correspondingly. The figures given in the table are typical with:
- Good ventilation (Outdoor exposure or free circulation of air)
Typical film thickness
- One coat on top of inert substrate.
- The given data must be considered as guidelines only. The actual drying time and time before recoating may be shorter or longer, depending on the ambient temperature, film thickness, ventilation, humidity, underlying paint system, requirement for early handling and mechanical strength etc.
1. Recommended data given is, for recoating with the same generic type of paint.
2. In case of multi-coat application, drying times will be influenced by the number and sequence and by the total thickness of previous coats applied.
3. The surface should be dry and free from any contamination prior to application of the subsequent coat.
- Relative Humidity (RH): 50 %
- Substrate temperature: 10 °C
- Surface (touch) dry: 6 h
- Hard dry: 20 h
- Dry to over coat, minimum: 20 h
- Substrate temperature: 23 °C
- Surface (touch) dry: 2 h
- Hard dry: 4 h
- Dry to over coat, minimum: 4 h
- Substrate temperature: 40 °C
- Surface (touch) dry: 1 h
- Hard dry: 3 h
- Dry to over coat, minimum: 3 h
Features and benefits
• Scratch Resistance - Reduce visible scratches and marks without the need for frequent wood finishing maintenance.
• 2x UV Protection - Minimise colour fading and protection against wood crack, peel and erosion from sunlight.
• Fast Drying - Convenient and quick drying solution that saves time, energy and manpower.
• Low Odour - Paint odour is low during and after application making the property ready for occupancy in shorter period.
• Anti Fungal - Prevents unsightly growth of surface fungus to maintain beautiful and healthy wood.
• Good Flexibility - Withstands constant wood expansion and contraction to minimise defects like cracking.
• Water Resistance - Prevents moisture absorption for prolonged wood life.
• Heavy Metals Free - Non-hazardous and does not contain Lead, Mercury, Chromium, Cadmium and Arsenic.
Type
A premium low odour urethane alkyd wood paint that is formulated to provide ultimate protection for wood surfaces that are exposed to UV and weather elements as well as frequent wear and tear.
Recommended use
For all exterior wood decks, outdoor garden furniture, interior wooden floors/parquet and all wood fixtures exposed to frequent touch/use.
Substrate
On solid timber and also engineered wood with original wood structure on surfaces (e.g. plywood & particleboard etc.)
Directions for use
Surface preparation
- The substrate must be clean and dry. Surface contamination is to be removed by thoroughly rubbing down in the direction of the wood grain, using a suitable abrasive paper and dusted off.
Recommended paint system
• Primer: Jotun Fungicidal Wash:1 coat (Optional)
• Topcoat: Woodshield Deck:3 coats
• Remarks
Directions for use:
Optional Step - Wash with Jotun Fungicidal Wash to prevent and remove fungus growth on the wood. Let the wood dry for 24 hours before application of Woodshield Deck.
Steps
1. Sand the surface of the wood thoroughly with #400 grit sand paper.
2. Wipe the wood surface with a cloth dampened with Jotun Gardex Thinner.
3. Allow solvent to evaporate fully before application of Woodshield Deck.
4. Repeat steps 1-3 for 2nd and 3rd coat of Woodshield Deck using #600 and #1000 grit sand paper respectively.
• Storage
- The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care.
Disclaimer
All product images shown are for illustration purposes only. Actual products may varies in term of size, type, brand, version, colour, and other relevant characteristics.