RL-Tech WB22 Water Based Mould Oil Release Agent 209L
RL-Tech WB22 Water Based Mould Oil Release Agent 209L
RM950.00
Price in reward points: 380000
- Model: RLT-WB22-209L
Products Sold: 0
Product Views: 4416
Description
- Colours: Cream Yellow.
- Size: 209L
- Specific Gravity: 0.93 - 0.98.
- Shelf Life: 8 Months.
- Average Consumption: 13 to 18m²/liters (Depending upon the surface porosity).
- Chemical Base: Water Based.
- Storage:
- Dry and Warm condition.
- Keep away from direct sunlight.
Advantages
- Good rust protection
- Economical
- Ensure stain-free concrete
- Easy to use
- Promote water repellent
- Biodegradable
- Ready to use
- Eco friendly
Suitable For
- Aluminium formwork
- Metal formwork
- Plastic formwork
- Timber formwork
- Precast concrete
Application Method
- To be used without adding in any other solvent or water.
- For a better surface finish, the surface of the mould should be free of dust, dirt, or grease.
- It can be applied using a sponge or conventional mould spray equipment. For even film, the correct nozzle of mould spray should be used. A brush or roller can also be used.
- Mould or formwork shall be cleaned each time after use.
Cleaning of Tools Application Method
- Clean All tools and application equipment should be cleaned immediately after use.
- Spillages or excess oil should be absorbed and transferred to a suitable container.