CMI 2781 Grey RC Coating High Quality Polymer Cement Based 40KG
CMI 2781 Grey RC Coating High Quality Polymer Cement Based 40KG
- Brand CMI
- Model: CMI-2781
Description
CMI RC COATING 2781 is a high quality polymer modified water-resistant cement-based thin plaster for concrete walls or ceilings. It is also good for surface improvement works to partially wet rendered wall surfaces. CMI RC COATING 2781 should not be used on painted surfaces.
Advantages
- Consistent Quality.
- Minimizes Cracks.
- User Friendly.
- Water Resistant.
- Enhanced Workability.
- Cost Effective.
- Optimum Bond Strength.
- Cleaner Worksite.
Technical Data
| Colour | Grey |
| Filler | Clean Graded Limestone |
| Additives | Water soluble polymers to improve workability, water-retention and adhesion |
| PH | 12 |
| Aggregate size | 0.5 mm max |
| Potlife | 3 hours |
| Coverage | Approximately 1.2 kg – 1.3 kg m2 / mm thick |
| Recommended thickness | 1 – 3 mm per coat |
| Density | Dry ± 1.3 kg / litre ; Wet ± 1.6 kg / litre |
| Toxicity | Chemically inert and non-toxic |
| Mixing ratio | Approximately 42% water on dry material |
| Packing | 40 kg |
Application Procedure
Receiving surface for plastering must be sound and free from dirt, dust, grease and traces of foreign materials that will affect adhesion. Where necessary, dampen the dry concrete or rendered surfaces before application of CMI RC COATING 2781. Add a 40 kg bag of CMI RC COATING 2781 to approximately 16.8 liters of clean water. Use a power drill to mix thoroughly. Allow mixture to stand for 10 minutes for additives to dissolve. Before using the plaster, mix again. Apply by using a steel trowel or spatula.
Storage
Storage life is approximately 6 months if stored in a cool and dry place.
Disclaimer
All product images shown are for illustration purposes only. Actual products may varies in term of size, type, brand, version, colour, and other relevant characteristics.
