Pentens ACW-014 Chopped Strand Fiberglass Mat 1M (W) x 50M (L)
Pentens ACW-014 Chopped Strand Fiberglass Mat 1M (W) x 50M (L)
- Brand Pentens
- Model: ACW-014
Description
PENTENS ACW-014 chopped strand fiberglass mat is made of medium-size strands of E-glass, held together by a powder binder which is extremely soluble in styrene. The basic strand has a sizing system containing a silane coupling agent.
Uses
It is suitable to use with:
- Polyester.
- Vinyl ester.
- Epoxy resin.
Advantages
- Good conformability..
- Fast impregnation..
- Low resin consumption..
- Excellent clarity of the UP lamination..
- Very high tensile strength, suitable for filament winding or continuous laminating..
- Good resistance to watering and chemical agents in anti-corrosive applications..
Technical & Physical Data
| Tensile Strength (CNS 13483) | MD: 14kgf |
| CD: 16kgf | |
| Maximum Load of Elongation (CNS 13483) | MD: 38% |
| CD: 2% | |
| Peel Strength (CNS 5812) (Flexible Cement) | 1.4 kgf/cm |
| Peel Strength (CNS 5812) (Water-based Polyurethane Waterproofing) | 1.5 kgf/cm |
| Material Analysis (FTIR) | Main constituent is glass fiber |
| Chemical Resistance (CNS 4447)(20% NaOH, 168hrs) | No variation |
| Glass Fiber Content (CNS 12777) | 80% |
| Dimension | 1m×50m |
| Packaging | 50m2/roll |
Important Notes
PENTENS ACW-014 should be stored dry in its original packaging. The best conditions are temperature between 15°C and 35°C at relative humidity between 35 - 85%. If the product is stored at low temperature (below 15°C), it is advisable to condition it in the workshop for at least 24 hours before using it to preventcondensation.
Disclaimer
All product images shown are for illustration purposes only. Actual products may vary in term of size, type, brand, version, colour, and other relevant characteristics.