Otter OtterGel Wiping Wood Stain 1 Quart (0.94L)

Description

OtterGel is unlike any liquid stain, available in 45 colors. It is very easy to apply, ni skilled labor is required. It is ideal for vertical wood surfaces. As a colored foundation compatible with all types of lacquers, P.U., N.C. and Acrylic, etc. 

Recommended Use 

Ideal for wood, fiberglass, metal and composite doors. Use on all interior wood surfaces, furniture, hardboard surfaces, molding, veneer, and wall paneling. 

Specification/Sheen 

Appearance: Colored gel or natural 

Matte 

Application 

Just apply, rub, wipe with a clean lint-free cloth (T-Shirt) 

• The surface should be free of finish wax or contaminates.. 
• Use 280 grit sandpapers to sand a smooth surface.. 
• Rub OtterGel with lint cloth or sponge spreading as far as possible to fill the wood pores evenly.. 
• Only one coat is required. Wipe off excess gel with another clean lint-free cloth in the direction of the grain until smooth and even, color achieved and no more sanding required. Wait at least 1 hour to dry.. 
• To dilute gel, mineral spirit or turpentine liquid can be added.. 

(For gloss appearance: apply 2 coats of Furniture Crystal Lacquer sealer and 2 coats Top Coat (Gloss or Matte Finishes) or Otter H20 based Polyurethane finish) 

Result 

• It does not raise the grain of the wood. 
• Leave no wiping or lap marks. 
• No stirring - color very consistency from top to bottom. 

Benefits/Features 

• Suitable for all hard and soft timber. 
• Topcoat in an hour, set to touch in 20 minutes. 
• Fade resistance, never peel or blister. 
• Economic to use - 3 times coverage than shellac or varnish.. 

Coverage 

• 320 to 360 sq.ft

Caution: Keep out of reach of children  

Disclaimer
All product images shown are for illustration purposes only. Actual products may varies in term of size, type, brand, version, colour, and other relevant characteristics.