W&H A-Plas Mortar Additive 100G
W&H A-Plas Mortar Additive 100G
- Brand W&H
- Model: W&H-AP100
Description
W&H A-Plas is a powder additive for better dispersing of Portland cement into plastering & bricklaying cement mortar. W&H A-Plas is made of high polymer polymerization cellulose, when mixed with water it raises the water molecules, retains water required for hydration and enhance the density of the mortar. With W&H A-Plas, can save time and labour while getting better quality mortar and plaster.
Benefits
- Increase strength & bond.
- Improves the workability.
- Better-hydrated effect.
- Reduce cost.
- Keep construction site clean.
- Easy stock check.
- Reduce shrinkage cracks.
Applications
| Standard Mixing Procedure | |
| Water | 30 liter (Normal Plaster Pail) |
| A-Plas | 100g |
| Wallcrete/OPC | 50kg |
| Fine Sand | 250kg (25-35 Scopes) |
Note: Homogerieous Mix shall be obtained after 5 minutes.
: Coarse sand or contain excessive clay component shall not be used.
Technical Data
| Colour | Brown |
| Cement | Wallcrete / OPC compatibility |
| Additive | High polymer polymerization cellulose water base |
| Fire Risk | Does not spread or support fire |
| Toxicity | Non-toxic |
| Safety precaution | Wash with plenty of water if contacted eye treatment immediately |
| Packing | 100g per packed |
Compressive Strength For Concrete Cubes
- Submittor by: W&H Wallcorp Sdn. Bhd.
- No. of Specimen: 5 nos.
- Size of Specimen: 50mm x 50mm x 50mm.
- Testing Date: 08.04.2005.
- Job no./Ref/ no: J20055040402 / (SQAS / CBMT / T.REC / CSL / 02).
| Specimen Reference | Compressive Load (kN) | Compressive Strength (MN/m²) |
| 1 | 29.8 | 12.0 |
| 2 | 28.9 | 11.5 |
| 3 | 30.6 | 12.0 |
| 4 | 29.4 | 12.0 |
| 5 | 31.4 | 12.5 |
| Average | 12.0 |
Disclaimer
All product images shown are for illustration purposes only. Actual products may varies in term of size, type, brand, version, colour, and other relevant characteristics.