MacoAvell Vellma Marmorino Plaster Decorative Special Effect 25KG

Description

• Macoavell VELLMA Marmorino offers a unique expression of colour, shape and design in any environment. A decorative plaster that offers a superb finish that looks opulent and beautiful while retaining affordability.
• Available in a range of colours, this versatile material can create a variety of subtle or impactful effects, while providing a tough, low maintenance finish for any interior space. The patterning is created using a steel trowel, and it can offer a broad range of looks depending on requirements. From a marble-like look to the subtle blending of shades, including multiple colours if needed, the possibilities are endless.
• The subtle texture and patterning of the surface are enhanced by the gloss finish, giving a luxurious look that brings those colours and patterns to life. That finish is achieved as Marmorino can be burnished to a high gloss, giving depth and clarity to the surface and a stunning look for any interior space. The precise level of gloss can be varied with burnishing, allowing a variety of effects that in combination with colour choice and skilled installation creates endless possibilities for interior design.
• This super glossy finish is a low odour, making it easier to fit in spaces without overtly disturbing existing occupants in other areas of the premises. Safety focused, it is o% VOC, formaldehyde-free and has anti-fungal and anti-bacterial properties for long-term good looks and simple maintenance.
• Super easy to apply, VELLMA Marmorino provides exceptional looks with a durable, rich glossy finish, providing exceptional value without compromising on quality or design. 

Features

• Glossy
• Breathable
• Durable
• Anti-Fungus
• Low VOC
• Ready-Mixed
• Technical Data Sheet (TDS)

How to use?

Stir contents before using.

FIRST COAT:

1. Use a round edge trowel.
2. Apply a thin layer of VELLMA and cover the entire surface and then remove excess by tilting trowel to approximately 30°.
3. Once the excess has been removed, smooth surface using a 30° angle.
4. Let it dry for 8 hours.

SECOND COAT:

1. Apply a thin layer of VELLMA, use overlapping long and short strokes.
2. Cover the surface thoroughly, filling voids and removing high spots.

BURNISH:

1. Wait around 15 to 30 minutes before burnishing with the same trowel to achieve high gloss finish.
2. Let it dry for at least 24 hours before moving on to the finish treatment.
3. Apply VELLWAX and buff off evenly will add durability to the surface.

Coverage/Thinning

Five kilograms (11 Lbs) covers up 60 – 80 sq. ft. on a smooth wall, significantly less on acoustical tile or rough surface. We do not recommend thinning down the plaster but if you wish to create other effects, thinning not more than 1 oz. (29.6ml mL) of water per 11 lbs (5kg) of plaster.

Drying Time

Plaster only when surface and air temperatures are 50-90 °F (10-32 °C), wait 8 hours before recoating or 24 hours before applying MACOAVELL VELLWAX.

Surface Preparation

Thoroughly clean the surface and allow drying. Remove wallpaper and loose, peeling paint. Patch cracks and spot prime. Dull glossy surfaces.

Acoustical Tile

Vacuum or dust tiles to remove embedded dust. To maintain the sound-absorbing qualities of the tile, do not use a primer. Apply plaster directly to the tiles. Test vinyl-coated tiles to ensure adhesion. Do not attempt to fill or clog acoustical perforations. “Blown-on” Soft-Fibered Ceilings: Caution! All water-based plaster will loosen or deteriorate a “blown-on” soft-fibered ceiling surface and make for a difficult repair. If you are not sure about your ceiling texture type, apply a small test area in a closet or other hidden spot. If deterioration occurs.

Colour Available

Disclaimer

All product images shown are for illustration purposes only. Actual products may vary in term of size, type, brand, version, colour, and other relevant characteristics.