Wood-Kare Crystal Clear Lacquer - Non Yellowing Acylic Sanding Sealer 1 Gallon (3.8L)

Description
• Wood-kare Crystal Clear ' CCL' is an acrylic based non-yellowing, fast drying lacquer.
• It is special formulation for Wood-kare DIY Gelled Stain / OtterGel Stain modern colors such as white wash, pink, wheat and violet.
• These colors after coated with CCL will never turn yellow.
• CCL provides with durability, hard clear finish and also protect wood against penetration of water,household chemical, food stains.

Benefits / Features 
• Crystal Clear & non-yellowing.
• Will not chip or peel.
• Quick drying and good stack ability.
• Good heat and scratch resistance.
• Excellent resistance to water and household chemical.

Recommended Uses 
• Wood furniture. 
• Wood moulding. 
• Kitchen cabinet, wardrobe. 
• Wood paneling. 
• Wooden doors & frames.

Specification / Sheen 
• Appearance: Crystal Clear.

Colors 
• Available in gloss, matt and sanding sealer

Packing: 1 Gallon

Drying Time 
• Touch Dry: 20 minutes
• Hard Dry: 24 hours

Finish Sheen
• Gloss Level 60° Angle
• Gloss - approx. 75%
• Satin - approx. 45%
• Matt - approx. 15%

Coverage
• Approx. 12 sqm per Litre / coat

Thinning Ratio (CCL: Thinner)
• Maximum 1:1
(use good quality thinner)

Tools / Clean up
• Brush or Spray Gun
• Use Thiner to clean up

Application 
• Getting Started: Clean wood surface thoroughly, making sure it is free of wax or other contaminants. For newly stained surface, proceed to Wood- Kare Crystal Clear Sanding Sealer helps improve the condition of top coat by sealing the wood pores. For old varnised / lacquered surfaces, sand (grit 280-320 sandpaper) lightly to get an even surface. For bare wood, fill cracks / holes with Otter Wood Filler if any. Let dry and sand smooth.
• Apply Sanding Sealer: Brush on or spray 1 to 2 coats of Wood-Kare Crystal Clear Lacquer Sanding Sealer. Let dry for 1/2 hour and then gently sand in the direction of the wood grain with 280-320 grit sandpaper. Always brush away sanding dust, and ready to apply Top Coat.
• Apply Top Coat: Brush or spray on 2-3 coats of Wood- Kare Crystal Clear Lacquer. Let dry for 1/2 hour, between coats, if the surface not smooth sand lightly with 320 grit sandpaper. Do not sand the final coat.

Caution: Combustible and keep away from children 

Disclaimer 

All product images shown are for illustration purposes only. Actual products may varies in term of size, type, brand, version, colour, and other relevant characteristics.