V-Tech VT-210 High Performance Sealant 100% Neutral Silicone Sealant 300ML - White/Grey/Black/Translucent

Description
• A one-component, high performance, 100% neutral cure silicone sealant formulated to give excellent adhesion and durability. It has excellent resistance against outdoor weathering, vibration, temperature extremes, etc.
• VT-210 High Performance Sealant is a silicone sealant with excellent resistance to weathering, UV radiation, vibration, moisture, ozone, temperature extremes, airborne pollutants, and many cleaning detergents and solvents.
• It is a single-component elastomeric sealant that is permanently elastic upon curing and has a movement capability of ±50 %.
• Specially formulated to achieve superior performance and feature low VOC emission and content, VT-210 is able to comply with the stringent requirements of ASTM C920 as well as contribute to the Leadership in Energy and Environmental Design (LEED) v4.1 credit.
• VT-210 also conforms to MS-1583: Part 1: 2003 – Suitability of Non-Metallic Product for use in contact in water intended for human consumption with regard to their effect on the quality of water.
• Additionally, VT-210 Grey meets the requirements for AS/NZS 4020:2005, testing of products for use in contact with drinking water.

Features
• 100% neutral silicone
• Certified Green Building Standard
• Food Contact Safe
• ±50 % movement capability
• Excellent weathering resistance
• Permanently flexible
• Indoor and outdoor use
• LEED v4.1 EQ Credit: Low-Emitting Materials compliant
 

Specification
Base: Silicone polymer
Physical State: 
   - Non-sagging paste (Before cure)
   - Elastic rubber (After cure)
• Available Colour
Standard Colours
   - (T10) Translucent
   - (W10) White
   - (G10) Grey
   - (B10) Black
• Tack-free/Skin-Form Time: 10 – 30 minutes (at 25 °C & 50% R.H.)
• Packaging: 300 mL/cartridge
• Shelf Life: 12 months (cartridge)
• Storage: Store in a dry and cool place with temperature below 30 °C
• Application Temperature: -20 °C – 50 °C
• Service Temperature: -40 °C – 150 °C
• Curing system: Moisture curing, neutral

Application
• Well-suited for a strong weatherproof seal on most common building materials such as glass, aluminium, galvanized and zinc-coated steel, painted surfaces, brick, concrete and mirror bonding.
• Ideal for sealing metal lap joints in roofing, guttering and cladding applications.

Preparation
• Substrate surface must be dry and clean; free of dirt, grease, oil, or standing water.
• For a neat finishing, use masking tape and remove it within the working time.
• 602 Primer is recommended especially for porous substrates such as concrete for excellent adhesion.
• For sealant designs with depth of over 10 mm, use approved backing materials.

Application Direction 
Cartridges:
1. Cut the cartridge tip carefully.
2. Cut the nozzle into an appropriate diameter at an angle of approximately 45° to 60°.
3. Use a caulking gun and extrude the sealant with a single bead.
4. Tool the sealant bead with a clean and dry tool within the working time for a smooth finishing.
Clean Up
▪ Wet sealants can be cleaned up with acetone or mineral spirits.
▪ Cured sealants can only be removed mechanically.

Caution
• Product releases methylethylketoxime during application and curing.
• May cause an allergic skin reaction.
• If medical advice is needed, have product container or label at hand. Avoid breathing dust/fume/gas/mist/vapours/spray.
• Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.
• Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.
• Keep out of reach of children. For further health and safety information, consult the latest safety data sheet.

Technical Data Sheet (TDS)

Disclaimer
All product images shown are for illustration purposes only. Actual products may vary in terms of size, type, brand, version, color, and other relevant characteristics.