Uromix UHC80 Urohancer Cement Enhancer/Cement Additive 80G (100 BAGS/CARTON)

Description 

Urohancer is formulated as a cement enhancer to add into OPC cement mortar. It is designed to improve OPC’s tensile adhesion, increases its flexural strength in bending, and to enhance it abrasion resistance characteristic. OPC cement mortar added with Urohancer makes a good rheology, and increases its workability for smooth and easy tiles installation. 

Advantages 

For Tiles Installation 

• Improves performance of OPC cement mortar. 
• Enhanced workability of OPC cement mortar. 
• Enhanced water retention ability of OPC cement mortar. 
• Extended OPC cement mortar open time / prolonged life span. 
• Excellent Initial Strength for bigger and heavy tiles or marble. 
• High tensile pulling strength combination with UROCRETETM. 
• Enormous cost saving, in replacement of conventional 25kg pre-mix tile adhesive. 

Uses 

For Tiles Installation 

• UROHANCER is an additive to add with OPC cement mortar as a tile bedding mortar. 
• UROHANCER is use conjunctionally with UROCRETETM for non-porous tiles installation eg: Porcelain, Homogenous, Marble, Granite, Stone. With UROCRETE as a bonding agent apply on the surface of receving tile bedding mortar. 
• UROHANCER is use solely added with OPC cement mortar for porous tiles installation eg: Ceramics, Terracotta etc.. 
• UROHANCER cement mortar is allowed to add with washed fine sand to further cost saving and for workability purpose especially for floor tiles. 
• In replacement of conventional pre-mix Tile Adhesive, UROHANCER cement mortar is enormous time and cost saving with improved bonding ability. 

For RC/Shear Wall Plastering 

UROHANCER cement mortar is suitable for use as a ‘Spatter Dash’, chopping/ stamping mortar admixture. 

Surface Preparation 

All surfaces must be structurally sound, clean, dry and free from movement, dust, oil, grease, wax and other contaminants. 

For Tiles Installation 

Ensure the back of the tiles is free of dirt, wax, grease, oil, water and other contaminants. Painted surfaces must be chipped with an axe to expose at least 65% of plastered surface and must be primed with UROPRIME before apply UROCRETE for tiles installation. Ensure the surface receiving UROHANCER cement mortar is sound and free of dust. 

Packaging 

• Available in 80gram/bag . 
• 100 bags/carton. 
• Colour : White powder. 

Shelf Life 

At least 12 months when stored in normal, dry conditions at ambient temperature. Store out of direct sunlight. 

Mixing 

Prepare a 20L kind of bucket/pail/container, add in 7-8 litre of water, add in UROHANCER 80g, stir it with electrical mixer, add in 22kg of Ordinary Portland Cement (OPC) and stir it again with electrical mixer until a lump-free, creamy consistency admixture is achieved. Allow the mix to stand for 5 minutes and remix prior to use. Mix lasts approximately 1-2 hours, depend on the temperature. 

Application 

For Non-porous Tiles (Porcelain, Homogenious, Marble etc) Apply UROCRETETM with brush or roller on the receiving surface of UROHANCER cement mortar, ensuring an even distribution. Minimises overlapping of material on same applying area. Leave to dry for 20 minutes before next application. Proceed with mixing of UROHANCER cement mortar. 

For Porous Tiles (Ceramics, Teracotta etc) Preparation of ceramics tiles such as soak with water when necessary, then proceed with the mixing of UROHANCER cement mortar. Spread the UROHANCER cement mortar onto the substrate. The choice of the trowel should be governed by the size of the tiles, depth of knobs, grooves or ridges on the back of the tiles and the evenness of the substrate. 

Cleaning 

Wash and clean the tools and bucket with water when the mortar is still wet. 

Health & Safety 

This product is non-toxic. In cases of allergic and sensitive skin contact, flush and clean with water. If severe medical reaction happened please seek for prefessional help. 

Disclaimer
All product images shown are for illustration purposes only. Actual products may varies in term of size, type, brand, version, colour, and other relevant characteristics.