Sika Fastplug 102 Ultra Fast Setting Compound For Stopping Water Leaks 5KG (PAIL)
Sika Fastplug 102 Ultra Fast Setting Compound For Stopping Water Leaks 5KG (PAIL)
- Brand Sika
- Model: SK-FP102-5KG
Description
▪ Sika® Fastplug-102 is a chloride free, fast-setting cementitious mortar in prepacked powder form.
▪ When mixed with water it becomes a powerful, fast-setting permanent waterplug.
Characteristics / Advantages
▪ Easy to use, easy to mix – just add to water.
▪ Very fast setting with rapid strength development.
▪ Permanent.
▪ Good adhesion.
▪ Excellent water-stopping power and hydraulic resistance.
▪ No cracking.
▪ Will not cause corrosion to steel bars.
▪ Non-toxic after hardening.
Specification
Product Information
▪ Packaging: 5 kg pail
▪ Appearance / Colour: Grey powder
▪ Shelf Life: 6 months from the date of production
▪ Storage Conditions: Store properly in original, unopened and undamaged packaging in dry and cool conditions. Protect from direct sunlight.
Technical Information
▪ Reaction to Fire: Fire rating, Classified A1 - Sika® Fastplug-102 will not contribute in any state of the fire including fully developed fire. (EN13501-1)
Application Information
▪ Mixing Ratio: Sika® Fastplug-102:water = 1:0.24–0.30 (by weight)
Uses
To stop water leaks and seepage through rock and concrete, as well as through joints between concrete and steel (bolt surroundings, ducts, sheet piles, etc.) in subways, culverts, tunnels, dams, basements, pools, etc.
Application
• Check the full extent and reason for the leak so as to ensure no further problems will be caused by sealing the leak. Then cut concrete or rock in “V” shape
around the leaking point. Remove all chippings, unsound and loose particles and clean surface with water prior to application of Sika® Fastplug-102.
• Mix Sika® Fastplug-102 with clean water (please refer to “Mix Ratio”) to a pasty consistency. As Sika® Fastplug-102 is very fast setting, mix only small quantities.
• Apply freshly prepared Sika® Fastplug-102 into the Vshapes cut, starting from the outside and working towards the centre (plug minor leaks).
• Hold material in place by hand for 1–2 minutes. When sealed and set, cut off excess materials to flush with surface. Keep the surface damp.
• The hardening time of Sika® Fastplug-102 is between 80–130 seconds (at +25°C).
Disclaimer
All product images shown are for illustration purposes only. Actual products may vary in term of size, type, brand, version, colour, and other relevant characteristics.