Qinglong Roofing Waterproof Coating (Weather-Resistant & Decorative Type) 5KG
Pre-Order
Qinglong Roofing Waterproof Coating (Weather-Resistant & Decorative Type) 5KG
RM110.00
Price in reward points: 44000
- Model: QL-RWC5
Products Sold: 0
Product Views: 1423
Available Options
Description
QL- Roofing Waterproof Coating (weather-resistant and decorative type) is a single-component water-based waterproof coating. It is produced by combining acrylic emulsion with other additives using foreign advanced technologies and materials.
Features
- Using water as a dispersion medium; non-toxic, odorless, non-polluting, environmental-friendly product.
- Single component, cold application, can be applied by brushing, rolling, spraying, scraping, etc.
- Excellent resistance to aging, elongation, elasticity, adhesion, and firm formation.
- The waterproof layer is a closed system with an overall good waterproof effect, especially suitable for the application of a special-shaped structural base layer.
- Can be used as a color protective layer for the black waterproof layer of rubberized asphalt to achieve a beautifying effect.
Application Range
- Suitable for waterproofing and heat insulation of short-term water-immersed areas such as metal roofing.
- Especially suitable for roof waterproofing. It can also be used as an adhesive or exterior wall decorative coating.
- Suitable for waterproofing and decoration of old roofs.
Application Methods
- Base surface cleaning: The base surface must be flat, firm, and clean, with no water and osmosis, or dents. Cracks and leakage must be fixed first.
- Internal and external angles are to be made round
- Apply it with a roller or brush.
- The coating (especially the primer) should be constantly stirred even when in use.
- The coating should be applied evenly without precipitation.
- Apply a new coating on top of the other when the previous layer is not sticky to the hand.
- Each layer must be coated according to the specified quality. It should not be too thick or too thin.
- Use the QL- Non-Woven Fabric to strengthen smaller parts. After applying the first layer, paste the QL- Non-Woven Fabric without using water; thereafter apply the second and third layers.
Recommended Amount
- 1.5~2.0mm thick (1.5~2.0kg/㎡)