Menu
Your Cart
FREE SHIPPING OVER RM500
CALL US NOW

Qinglong Roofing Waterproof Coating (Weather-Resistant & Decorative Type) 18KG

Pre-Order

Qinglong Roofing Waterproof Coating (Weather-Resistant & Decorative Type) 18KG

Based on 0 reviews. | Write a review
RM339.00
Price in reward points: 135600
  • Model: QL-RWC18
Products Sold: 18
Product Views: 733

Available Options

Add to Cart
Send Inquiry
Click to share this page to your friends & families and start earning. Affiliate

Description

QL- Roofing Waterproof Coating (weather-resistant and decorative type) is a single-component water-based waterproof coating. It is produced by combining acrylic emulsion with other additives using foreign advanced technologies and materials.

 

Features

  • Using water as a dispersion medium; non-toxic, odorless, non-polluting,  environmental-friendly product.
  • Single component, cold application, can be applied by brushing, rolling, spraying, scraping, etc.
  • Excellent resistance to aging, elongation, elasticity, adhesion, and firm formation.
  • The waterproof layer is a closed system with an overall good waterproof effect, especially suitable for the application of a special-shaped structural base layer.
  • Can be used as a color protective layer for the black waterproof layer of rubberized asphalt to achieve a beautifying effect.

 

Application Range

  • Suitable for waterproofing and heat insulation of short-term water-immersed areas such as metal roofing.
  • Especially suitable for roof waterproofing. It can also be used as an adhesive or exterior wall decorative coating.
  • Suitable for waterproofing and decoration of old roofs.

 

Application Methods

  1. Base surface cleaning: The base surface must be flat, firm, and clean, with no water and osmosis, or dents. Cracks and leakage must be fixed first.
  2. Internal and external angles are to be made round
  3. Apply it with a roller or brush.
  4. The coating (especially the primer) should be constantly stirred even when in use.
  5. The coating should be applied evenly without precipitation.
  6. Apply a new coating on top of the other when the previous layer is not sticky to the hand.
  7. Each layer must be coated according to the specified quality. It should not be too thick or too thin.
  8. Use the QL- Non-Woven Fabric to strengthen smaller parts. After applying the first layer, paste the QL- Non-Woven Fabric without using water; thereafter apply the second and third layers.

 

Recommended Amount

  • 1.5～2.0mm thick (1.5～2.0kg/㎡)