Pentens Slate-Seal 821 Water Based Transparent Protecting Acrylic Coating 5L

Description
PENTENS Slate-Seal 821 Water-based Transparent Protecting Acrylic Coating is suitable to be used for natural stones, external walls, tiles, brickworks, concrete structure protective coatings and etc.

Features
• Water-based Transparent Protecting Acrylic Coating.
• Suitable for natural stones, external walls, tiles, brickworks, concrete structure protective coatings and etc.

Benefits
• Good adhesion
• UV resistance
• Excellent weather-resistance
• Dust-proof
• Durable excellent abrasion resistance for light traffic
• Fast drying
• Excellent toughness
• Low viscosity
• Good penetration
• Non-yellowing
• Waterproofing
• Not easy to be tainted with contaminants
• Superior chemical resistance

Specifications
• Form: Liquid
• Color: Transparent
• ​​​​​​​Finish: Semi-Gloss
• ​​​​​​​Density (CNS 6986, CNS 6988): 1.01kg/per liter
• ​​​​​​​Consumption (approx.): 0.15kg-0.20kg/m2
• ​​​​​​​Drying time: Touch dry: 1 hour 
• ​​​​​​​Topcoat: 3 hours
• ​​​​​​​Shelf Life: 1 year when unopened and undamaged
• ​​​​​​​Storage Condition: Store in a dry cool place
• ​​​​​​​Packaging: 5L
• Product Data Sheet (PDS)

Uses
Areas of application include:
• ​​​​​​​Natural stones
• ​​​​​​​New and old concrete structure protective coatings.
• ​​​​​​​Floor slabs
• ​​​​​​​External walls
• ​​​​​​​Brickworks
• ​​​​​​​Tiles

Instruction for Use:
• Substrates must be dry and clean, application temperature should be 100°C ~450°C. Should not be installed when meet strong winds or rain. The material should not be contacted with water.
• PENTENS Slate-Seal 821 can be applied by brush, roller and airless spray equipment. For optimum results, airless spray is recommended. When applied by airless spray equipment, the saturated point has to be achieved.
• After curing, a transparent thin film would be achieved on the substrate, if the application has not been made uniformly, one more coat is necessary. 

​​​​​​​Important Notes
• Minimum ambient and substrate temperature is 10°C.
• Apply only to clean, surfaces should be free of surface water and leaks.

Safety
• Impervious gloves and barrier cream should be used when handling these products.
• Eye protection should be worn. In case of contact with eyes, wash thoroughly with plenty of water and seek medical advice if symptoms persist.
• If contact with skin occurs, it must be removed before curing takes place.
• Wash off with an industrial skin clearer followed by plenty of soap and water.
• Do not use solvent.
• Ensure adequate ventilation when using these products.

Disclaimer

All product images shown are for illustration purposes only. Actual products may vary in term of size, type, brand, version, colour, and other relevant characteristics.