Otter Timber Hard Wax 500ML (Clear Finish)

Description
• Otter Timber Hard Wax is a deep penetrating oil finish generated from plant-based ingredients with palm oil, linseed oil, tung oil, soya bean binder, bee wax and carnauba wax, it gives a rich natural translucent look, breathable without forming film on wood surface.
• It is easy and safe to use, just brush on and wipe off the excesses, no primer required.

Benefits
• User friendly
• Gel form
• Non grain raising
• Preserve and protects
• Low / mild, odourless after drying
• No overlapping
• Enhance the natural look and feel of the wood
• Allow wood to breath
• Water resistant
• No cracks, peels, flakes or blisters
• Easy to archieve professional finishes.

Recommended of Usage
• For indoor & outdoor floors solid wood table top & chairs
• Wooden flooring
• Logs
• Wooden doors
• Wooden frames
• Paneling
• Antique furnitures
• Wood planks.

Note: Timber hard wax will bring out and darken the colour of the wood, always try a small portion before proceed further.

Drying Time: 4 - 8 hours, re-apply in 8 hours.

Coverage: Approx. 25 - 30 m² / Litre, subject to wood porosity and coating. (2 times extra coverage compare to liquid stain)

Shelf Life (Unopen): 5 years, store in cool and ventilated place.

Application
• Make sure surface is dry, clean and smooth.
• Apply a thin layer of Otter hard wax evenly in circular motion and use a lint-free cloth to wipe off the excesses of hard wax, follow the direction of the wood grain.
• Wait 4 to 8 hours till its dry before applying the second coat.
• Sand it gently with 400 to 800 sand paper and then apply another thin layer of hard wax.
• Wait for 10 minutes, wipe gently with a dry cloth to improve surface gloss.
• Apply three or many layers for better protection.

Otter Timber Hard Wax Brochure (PDF)
 

Disclaimer 

All product images shown are for illustration purposes only. Actual products may be varied in term of size, type, brand, version, colour, and other relevant characteristics.