Otter Timber Hard Wax 20L (Clear Finish)
Otter Timber Hard Wax 20L (Clear Finish)
- Brand Otter
- Model: OT-HW-20L
Description
• Otter Timber Hard Wax is a deep penetrating oil finish generated from plant-based ingredients with palm oil, linseed oil, tung oil, soya bean binder, bee wax and carnauba wax, it gives a rich natural translucent look, breathable without forming film on wood surface.
• It is easy and safe to use, just brush on and wipe off the excesses, no primer required.
Benefits
• User friendly
• Gel form
• Non grain raising
• Preserve and protects
• Low / mild, odourless after drying
• No overlapping
• Enhance the natural look and feel of the wood
• Allow wood to breath
• Water resistant
• No cracks, peels, flakes or blisters
• Easy to archieve professional finishes.
Recommended of Usage
• For indoor & outdoor floors solid wood table top & chairs
• Wooden flooring
• Logs
• Wooden doors
• Wooden frames
• Paneling
• Antique furnitures
• Wood planks.
Note: Timber hard wax will bring out and darken the colour of the wood, always try a small portion before proceed further.
Drying Time: 4 - 8 hours, re-apply in 8 hours.
Coverage: Approx. 25 - 30 m2 / Litre, subject to wood porosity and coating.
(2 times extra coverage compare to liquid stain)
Shelf Life (Unopen): 5 years, store in cool and ventilated place.
Application
• Make sure surface is dry, clean and smooth.
• Apply a thin layer of Otter hard wax evenly in circular motion and use a lint-free cloth to wipe off the excesses of hard wax, follow the direction of the wood grain.
• Wait 4 to 8 hours till its dry before applying the second coat.
• Sand it gently with 400 to 800 sand paper and then apply another thin layer of hard wax.
• Wait for 10 minutes, wipe gently with a dry cloth to improve surface gloss.
• Apply three or many layers for better protection.
Otter Timber Hard Wax Brochure (PDF).