Otter OtterGel Wiping Wood Stain 1/3 Quart (0.31L)
Otter OtterGel Wiping Wood Stain 1/3 Quart (0.31L)
- Brand Otter
- Model: OT-OWWS-0.31L
Available Options
Description
• OtterGel is solvent based wood stain in gel form using wiping method to apply on all interior wood products.
• It will enriches the natural grain and enhance the beauty of a wide range of wood.
Benefits / Features
• Easy to apply, fast drying.
• Compatible with all type of solvent / water based lacquers (PU, NC, AC, ACRYLIC).
• No stirring required.
• Never peel and blister
• 2 times more coverage than liquid stain.
• Does not raise the wood grain.
• Leave no wiping or lap marks.
Recommended Use
• Ideal for timber door and frame, furniture, hard board, moulding, veneer, wall paneling and etc.
Specification/Sheen
• Appearance: Colored gel or natural Matte
Coverage
• 80 to 120 sq.ft / quart per coat
Tools / Clean up
• Lint free cloth or sponge.
• Clean up with turpentine.
Preparation & Application
• Getting Started: Prepare the necessary tools. Clean the wood thoroughly, make sure it is free of wax or other contaminats.
• Fill cracks and holes: Fill cracks or holes with OTTER Wood Filler of similar or nearest colour to the wood. Let dry and sand lightly to get an even surface. Clean away sanding rust.
• Apply Gel Stain: Wipe on Ottergel Stain in circular motion with a sponge or lint-free cloth. Spread as far as possible to fill ip the wood pores evenly, always in the direction of the wood grain.
• Remove Excess: Wipe off excess immediately with a dry cloth. Wipe in the direction of the wood grain to obtain a smooth and evenly distributed finish. Leave to dry for about half an hour.
• Apply sanding sealer: Brush on 1 coat of WOOD-KARE Crystal Clear Sanding Sealer. Leave dry and sand lightly with 280-320 grit sandpaper.
• Apply Top Coat: For interior use, brush or spray on 2-3 coats of WOOD-KARE Crystal Clear Top Coat. Leave dry and sand lightly between coats with 280-320 grit sandpaper. Finish available: Gloss, Satin & Matt.
Note: You may add a small amount of Ottergel Stain into sanding sealer or top coat to touch up the uneven wood color tone.
Result
• It does not raise the grain of the wood.
• Leave no wiping or lap marks.
• No stirring - color very consistency from top to bottom.
Caution: Keep out of reach of children
Disclaimer
All product images shown are for illustration purposes only. Actual products may vary in terms of size, type, brand, version, color, and other relevant characteristics.