MacoAvell Vellplas Matte Marmorino Plaster Decorative Faux Special Effect 5KG

Description

• VELLPLAS Matte Marmorino delivers high-quality, superb design and exceptional value in one.
• Available in a range of colors, this easy to apply decorative plaster can produce endless shading, texture, and patterning to suit any interior design. During installation, patterns and texture can be introduced, giving a unique look to any interior, with the matte finish giving a subtle and quality finish.

Features

• Ready-Mixed
• Breathable
• Low VOC
• Durable
• Technical Data Sheet (TDS)

How To Use

Stir contents before using

FIRST COAT:

• Apply the VELLPLAS with a flexible steel trowel, apply a thin coat of VELLPLAS while holding the trowel at a 15- to a 30-degree angle.
• Spread the VELLPLAS with varying lengths and angles of strokes.
• Clean off the trowel from time to time to keep dried VELLPLAS from getting into your finish.
• Let the VELLPLAS dry thoroughly before applying the next coat.

SECOND COAT:

• Apply a thin layer of VELLPLAS, use overlapping long and short strokes.
• Cover the surface thoroughly, filling voids and removing high spots.
• Let the VELLPLAS dry for at least 24 hours before moving on to the finish treatment.
• Apply VELLWAX and buff off evenly will add durability to the surface.

Coverage/Thinning

Five kilograms (11 Lbs) cover up 60 – 80 sq. ft. on a smooth wall, significantly less on acoustical tile or rough surface. We do not recommend thinning down the plaster but if you wish to create other effects, thinning not more than 1 oz. (29.6ml mL) of water per 11 lbs (5 kg) of plaster.

Drying Time

Plaster only when surface and air temperatures are 50-90 °F (10-32 °C), wait 8 hours before recoating or 24 hours before applying MACOAVELL VELLWAX.

Surface Preparation

Thoroughly clean the surface and allow drying. Remove wallpaper and loose, peeling paint. Patch cracks and spot prime. Dull glossy surfaces.

Acoustical Tile:

Vacuum or dust tiles to remove embedded dust. To maintain the sound-absorbing qualities of the tile, do not use a primer. Apply plaster directly to the tiles. Test vinyl-coated tiles to ensure adhesion. Do not attempt to fill or clog acoustical perforations. “Blown-on” Soft-Fibered Ceilings: Caution! All water-based plaster will loosen or deteriorate a “blown-on” soft-fibered ceiling surface and make for a difficult repair. If you are not sure about your ceiling texture type, apply a small test area in a closet or other hidden spot. If deterioration occurs.

Colour Available

Disclaimer

All product images shown are for illustration purposes only. Actual products may vary in term of size, type, brand, version, colour, and other relevant characteristics.