MacoAvell Vellcco Decorative Stucco Ready Mixed Lime Based Stucco For Interior & Exterior 5KG

Description

• MacoAvell VELLCCO is a ready-mixed lime-based stucco which can be used for interior and exterior. It is specially formulated for heavy texture design such as travertino and pitted effect
• Perfect for recreating the historical style of Italian nobles and luxurious living through the ages, Stucco is a textured decorative plaster that adds a new dimension to interior style. Available in a range of subtle hues that retain that classic feel, it is a timeless finish brought into the 21st century. 
• Our Stucco is easy to apply, and because it is a low odour, works well even in already occupied buildings, causing minimal disruption for exiting occupants. Safety is important too of course, and with 0% VOC and a formaldehyde-free formula, our Stucco is designed for safe use in any interior space. 
• Easy to apply and beautiful to look at, Stucco is a great material to create travertine effect,  gives a unique finish to any interior, bringing the timeless beauty of Italian pageantry to your next project.

Features

• Ready-Mixed
• Breathable
• Low VOC
• Durable
• Technical Data Sheet (TDS)

How to use?

Stir contents before using.

FIRST COAT:

1. Apply VELLCCO (about 1mm thickness ) with a flexible steel trowel, spread evenly throughout the wall.
2. Let it dry thoroughly before applying the next coat.

SECOND COAT:

• Same application as the first coat.

BURNISHING:

1. Burnish the wall to smoothen out when the second coat is semi-dry.
2. Spray some water if needed during burnishing.
3. Let it dry for at least 24 hours before moving on to the finish treatment.
4. Apply VELLWAX and buff off evenly will add durability to the surface.

Coverage/Thinning

5KG covers up 35-50 sq. ft. We do not recommend thinning down the plaster. But if you wish to create other effects, thinning not more than 1 oz. (29.6ml mL) of water per 11 lbs (5kg) of plaster.

DRYING TIME:

• Plaster only when surface and air temperatures are 50-90 °F (10-32 °C), wait 24 hours before recoating or applying MACOAVELL VELLWAX.

Surface Preparation

Thoroughly clean the surface and allow drying. Remove wallpaper and loose, peeling paint. Patch cracks and spot prime. Dull glossy surfaces.

Acoustical Tile

Vacuum or dust tiles to remove embedded dust. To maintain the sound-absorbing qualities of the tile, do not use a primer. Apply plaster directly to the tiles. Test vinyl-coated tiles to ensure adhesion. Do not attempt to fill or clog acoustical perforations. “Blown-on” Soft-Fibered Ceilings: Caution! All water-based plaster will loosen or deteriorate a “blown-on” soft-fibered ceiling surface and make for a difficult repair. If you are not sure about your ceiling texture type, apply a small test area in a closet or other hidden spot. If deterioration occurs.

Colour Available

Disclaimer

All product images shown are for illustration purposes only. Actual products may vary in term of size, type, brand, version, colour, and other relevant characteristics.