King Pump KP400 Super Silent Series Control Constant Pressure Pumps 400W

Specification
 

• Model: KP400. 
• Inverter Power (HP): 400W (1/2HP). 
• Diameter In (mm): 1" (25). 
• Voltage (V): 210/240. 
• Amp's (A): 2.6. 
• Cycle (Hz): 50. 
• Max pressure (kg/cm2): 2.7. 
• Max capacity (L/min): 60. 
• Warranty: 12 Months (1 Year). 
• Warranty: One to One Exchange (Terms & Conditions Apply). 

Pump Structure 

The KP series constant pressure pump system is a combination of pump and motor. A small diaphragm pressure tank, pressure sensor and high-tech CPU Controller, all incorporated into one constant pressure system. 

Operation Condition 

• The KP pumps clean water, without impurities.. 
• Ambient temperature: Max. +2°C~+40°C. 
• Liquid temperature range: Max. +2°C~+40°C. 
• Maximum discharge head: KP400 - 2.2kg/cm². 

Installation Note 

• You must install the product in cool and dry area.. 
• The pump must be installed to a water pipe or water tower.. 
• When you install the pump to the water pipeline, the water pipeline, must be clean, without rust or other impurities.. 
• The power voltage must be 240V/50Hz. 
• Installation sites depends on needs, select up or downward pressure in the electrical box.. 

Action Description 

• The KP seies water booster pump stabilizes the warterflow during operation. It automatically turns "off" when the taps are turned off.. 
• Without water supply, the KP series pump will "power off" within 30 seconds. It will automatically detect the water supply every 30 minutes until water supply is resumed. Shut off the power if the normal water flow does not return within 5 seconds. Pump can also be started manually.. 

Disclaimer 

All product images shown are for illustration purposes only. Actual products may varies in term of size, type, brand, version, colour, and other relevant characteristics.