Jotun Paint Jotashield Antifade Superior Exterior Protection For Wall 5L (Standard Colour)
Jotun Paint Jotashield Antifade Superior Exterior Protection For Wall 5L (Standard Colour)
- Brand Jotun Paint
- Model: JT-JSA-S-5L
Description
• Jotashield AntiFade Colours is made with Jotun Pigment Technology and hi-grade colourants to ensure your home stays protected and beautiful with long-lasting colours.
• Superior UV Protected Colours
- Reduces Temperature
- Anti Watermark
- 8 Years Colour Performance
• Jotashield AntiFade Colours offers long-lasting colours and superior weathering protection with minimal maintenance needed for peace of mind.
Specifications
• Packaging size: 5L
• Colours: As per the colour card and available in Jotun Multicolor tinting system (Exterior range).
• Solids by volume: 39 ± 2 volume%
Application data
• Remarks: Handle with care. Stir well before use.
• Application equipment / methods: By brush, roller, airless spray or conventional spray.
• Guiding data for airless spray
- Nozzle tip: 0.021–0.027"
- Spray angle degrees: 65–80°
- Pressure at nozzle: 140 - 190 kg/cm² (2100 psi)
• Spreading rate per coat
- Theoretical: 9.8 m²/l - 13 m²/l
- Spreading rate depends on film thickness applied, type of texture, surface porosity, imperfections, temperature, wastage during painting etc.
• Recommended film thickness per coat
- Wet 77 µm - 103 µm
- Dry 30 µm - 40 µm
- Film thickness will vary and are calculated as an average.
• Thinner: Water
• Dilution: The paint is ready to use after proper stirring. If thinning is required, water may be added up to a maximum of 5%.
• Conditions during application
- Apply at a temperature between 10°C - 35°C. The temperature of the substrate should be minimum 3°C above the dew point of the air. The temperature and the relative humidity should be measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper drying.
• Drying times
Drying times are generally related to air circulation, temperature, film thickness and number of coats, and will be affected correspondingly. The figures given in the table are typical with:
- Good ventilation (Outdoor exposure or free circulation of air)
Typical film thickness
- One coat on top of inert substrate
- The given data must be considered as guidelines only. The actual drying time and time before recoating may be shorter or longer, depending on the ambient temperature, film thickness, ventilation, humidity, underlying paint system, requirement for early handling and mechanical strength etc.
1. Recommended data given is, for recoating with the same generic type of paint.
2. In case of multi-coat application, drying times will be influenced by the number and sequence and by the total thickness of previous coats applied.
3. The surface should be dry and free from any contamination prior to application of the subsequent coat.
The drying time is measured by stated values:
- Relative Humidity (RH): 50 %
- Substrate temperature: 10 °C
- Surface (touch) dry: 2 h
- Hard dry: 8 h
- Dry to over coat, minimum: 4 h
- Substrate temperature: 23 °C
- Surface (touch) dry: 1 h
- Hard dry: 6 h
- Dry to over coat, minimum: 2 h
- Substrate temperature: 40 °C
- Surface (touch) dry: 0.5 h
- Hard dry: 4 h
- Dry to over coat, minimum: 1 h
Features and benefits
• Superior UV Protected Colours - Colour lasts more than 2x longer vs. other exterior paints. Made with Jotun Pigment Technology to protect your home and stays beautiful longer with lasting colours.
• Reduces Temperature - Paint reflects sunlight therefore reduce the surface temperature and cools your homes or buildings.
• Anti Watermark - Protects your home from visible watermark and keeps it looking fresh and beautiful.
• 8 Years Colour Performance - Certified by external lab to provide 8 years of lasting colours to protect your home.
• Anti Algae & Anti Fungal - Long lasting protection against fungus and algae in tropical climates.
• Dirt Resistance - Paint film resist dirt pick up from the environment and is easily washed off by the rain.
Type
• A premium 100% acrylic emulsion exterior paint equipped with Jotun Pigment Technology to protect your home from natural weathering and relieves you from worrying about maintenance.
• It fights colour fading caused by the weather elements and delivers outstanding durability with a wide selection of colours, carefully selected by experts to fit your choice and make your home beautiful.
Recommended use
For exterior application, suitable for new buildings or repainting.
Substrate
On concrete, masonry, plaster and brickwork.
Directions for use
Surface preparation
• The substrate must be sound, clean, dry and free from dust, oil, grease, laitance etc. All traces of form release agents/curing agents must be removed. A light sanding with suitable abrasive material is recommended before application. Any resulting dust/loose particles must be removed.
• Other Surface: The coating may be used on other substrates.
• Primer: Cito Primer 09 or Jotashield Primer or Jotun Ultra Primer:1 coat
• Topcoat: Jotashield Antifade Colours:2 coats
Recommended paint system
• Remarks: Other systems may be specified, depending on area of use.
• Storage
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care.
Disclaimer
All product images shown are for illustration purposes only. Actual products may vary in term of size, type, brand, version, colour, and other relevant characteristics.