Jotun Jotashield Ultra Clean Superior Dirt-Repellent Paint For Exterior 5L

Description
• Jotashield Ultra Clean with AntiDirt Technology keeps your home exterior walls looking fresh and clean for longer.
• Its dirt resistant features prevents dirt from sticking to the walls and reduces unsightly dirt streak marks that often form on ledges.
• The self-cleaning feature enables rain to wash away stubborn dirt, ensuring clean walls.
• Moreover, it provides 8 years of balanced protection.
• Ultimately, your house will look pristine for a longer time, no matter the weather.
   - Low Dirt Pickup
   - Dirt Streak-Resistant
   - Self-Cleaning
   - 8 Years Protection
• Jotashield Ultra Clean with AntiDirt Technology is an advanced dirt-repellent paint that self-cleans when it rains, keeping exteriors looking new.

Specifications
• Packaging size: 5L
• Colours: As per the colour card and available in Jotun Multicolor tinting system (Exterior range).
• Solids by volume: 38 ± 2 volume%
Application data
• Remarks: Handle with care. Stir well before use.
• Application equipment / methods: By brush, roller, airless spray or conventional spray.
• Guiding data for airless spray:
   - Nozzle tip 0.021–0.027"
   - Spray angle degrees 65–80°
   - Pressure at nozzle 140 - 190 kg/cm² (2100 psi)
• Spreading rate per coat
   - Theoretical 12.7 m²/l - 9.5 m²/l
   - Spreading rate depends on film thickness applied, type of texture, surface porosity, imperfections, temperature, wastage during painting etc.
• Recommended film thickness per coat
   - Wet 79 µm - 105 µm
   - Dry 30 µm - 40 µm
   - Film thickness will vary and are calculated as an average.
• Thinner: Water
• Dilution: The paint is ready to use after proper stirring. If thinning is required, water may be added up to a maximum of 5%.
• Conditions during application
   - Apply at a temperature between 10°C - 35°C. The temperature of the substrate should be minimum 3°C above the dew point of the air. The temperature and the relative humidity should be measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper drying.
• Drying times
Drying times are generally related to air circulation, temperature, film thickness and number of coats, and will be affected correspondingly. The figures given in the table are typical with:
   - Good ventilation (Outdoor exposure or free circulation of air)
Typical film thickness
   - One coat on top of inert substrate
   - The given data must be considered as guidelines only. The actual drying time and time before recoating may be shorter or longer, depending on the ambient temperature, film thickness, ventilation, humidity, underlying paint system, requirement for early handling and mechanical strength etc.
1. Recommended data given is, for recoating with the same generic type of paint.
2. In case of multi-coat application, drying times will be influenced by the number and sequence and by the total thickness of previous coats applied.
3. The surface should be dry and free from any contamination prior to application of the subsequent coat.
The drying time is measured by stated values:
   - Relative Humidity (RH): 50 %
   - Substrate temperature: 10 °C 23 °C 40 °C
      - Surface (touch) dry: 2 h 1 h 0.5 h
      - Hard dry: 8 h 6 h 4 h
      - Dry to over coat, minimum: 4 h 2 h 1 h
   - Substrate temperature: 10 °C 23 °C 40 °C
      - Surface (touch) dry: 2 h 1 h 0.5 h
      - Hard dry: 8 h 6 h 4 h
      - Dry to over coat, minimum: 4 h 2 h 1 h
   - Substrate temperature: 10 °C 23 °C 40 °C
      - Surface (touch) dry: 2 h 1 h 0.5 h
      - Hard dry: 8 h 6 h 4 h
      - Dry to over coat, minimum: 4 h 2 h 1 h

Features and benefits
• Low Dirt Pickup - Prevents dirt pickup on your exterior walls keeping your walls clean and beautiful for longer.
• Dirt Streak-Resistant - The formulation effectively minimises the formation of dirt streak marks on walls, keeping the exterior of your home looking spotless.
• Self-Cleaning - Contains a self-cleaning feature that enables rain to wash soot away from your exterior walls keeping your walls fresh and clean even after heavy rainfall.
• 8 Years Protection - Certified by external labs to provide 8 years of protection for your home. (Note: Not applicable for Thailand)
• Superior UV Protected Colours - Colour lasts more than 2x longer vs. other exterior paints. Made with Jotun Pigment Technology to protect your home and stays beautiful longer with lasting colours.
• Reduces Temperature - Jotun Pigment Technology reduces temperature for your home by reflecting sunlight away and stops heat from building up.
• Anti Algae & Anti Fungal - Long lasting protection against fungus and algae in tropical climates.

Type
A premium 100% acrylic emulsion exterior paint with its unique AntiDirt Technology to protect your home from dirt, with its advanced self-cleaning feature that washes dirt away when it rains. This ensures that your home exterior will be kept clean, no matter the weather.

Recommended use
For exterior application, suitable for new buildings or repainting.

Substrate
On concrete, masonry, plaster and brickwork.

Directions for use
Surface preparation
• The substrate must be sound, clean, dry and free from dust, oil, grease, laitance etc. All traces of form release agents/curing agents must be removed. A light sanding with suitable abrasive material is recommended before application. Any resulting dust/loose particles must be removed.
Other Surface: The coating may be used on other substrates.
Please contact your local sales representative for more information.
• Primer: Cito Primer 09 or Jotashield Primer or Jotun Ultra Primer:1 coat
• Topcoat: Jotashield Ultra Clean:2 coats
Recommended paint system
• Remarks: Other systems may be specified, depending on area of use.
• Storage
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care.

Technical Data Sheet (TDS).pdf