Jotun Paint Gardex Premium Gloss Wood & Metal 5L
Jotun Paint Gardex Premium Gloss Wood & Metal 5L
- Brand Jotun Paint
- Model: JT-GPSG-5L
Description
• Gardex Premium Gloss is a high quality enamel paint for wood and metal surfaces, excellent for both interior and exterior usage.
• With almost no odour during and after application, it makes painting easier and more home friendly compared to other enamel paints.
• It also has optimised drying time to ensure smooth and tough finishes in the shortest time possible, while Jotun's True Colour Technology delivers outstanding colours that stand the test of time.
- Low Odour
- Optimized Drying Time
- Excellent Colour Last
- Anti Fungal
- Anti Rust
• Premium low odour gloss paint for wood and metal surfaces. This high quality enamel paint has outstanding durability with excellent colour retention.
Specifications
• Packaging size: 5L
• Colours: As per colour card and available in Jotun Multicolor tinting system (Interior range).
• Solids by volume: 48 ± 2 volume%
• Flash point: Closed cup: 46°C (114.8°F)
• VOC: 400 g/l ASTM D3960
Application data
• Remarks: Handle with care. Stir well before use.
• Application equipment / methods: By brush, roller, or conventional spray.
• Guiding data for airless spray
- Nozzle tip: 0.013–0.021"
- Spray angle degrees: 65–80°
- Pressure at nozzle: 140 - 190 kg/cm² (2100 psi)
• Spreading rate per coat
- Theoretical Spreading rate per coat (m²/l) : 12 - 16
- Spreading rate depends on film thickness applied, type of texture, surface porosity, imperfections, temperature, wastage during painting etc.
• Recommended film thickness per coat
- Dry film thickness : 30 - 40 microns (μm)
- Wet film thickness : 62 - 83 microns (μm)
- Film thickness will vary and is calculated as average.
• Thinner: Gardex Thinner
• Dilution: The paint is ready to use after proper stirring. If thinning is required, Jotun Gardex Thinner may be added up to a maximum of 5%.
• Conditions during application
- The temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air, measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper drying.
• Drying times
Drying times are generally related to air circulation, temperature, film thickness and number of coats, and will be affected correspondingly. The figures given in the table are typical with:
- Good ventilation (Outdoor exposure or free circulation of air)
Typical film thickness
- One coat on top of inert substrate
- The given data must be considered as guidelines only. The actual drying time and time before recoating may be shorter or longer, depending on the ambient temperature, film thickness, ventilation, humidity, underlying paint system, requirement for early handling and mechanical strength etc.
1. Recommended data given is, for recoating with the same generic type of paint.
2. In case of multi-coat application, drying times will be influenced by the number and sequence and by the total thickness of previous coats applied.
3. The surface should be dry and free from any contamination prior to application of the subsequent coat.
The drying time is measured by stated values:
- Relative Humidity (RH): 50 %
- Substrate temperature; 10 °C
- Surface (touch) dry: 6 h
- Hard dry: 24 h
- Dry to over coat, minimum: 24 h
- Substrate temperature; 23 °C
- Surface (touch) dry: 4 h
- Hard dry: 12 h
- Dry to over coat, minimum: 12 h
- Substrate temperature; 40 °C
- Surface (touch) dry: 2 h
- Hard dry: 8 h
- Dry to over coat, minimum: 8 h
Features and benefits
• Low Odour - Paint odour is low during and after application making the property ready for occupancy in shorter period.
• Excellent Colour Last - Durable colours and gloss finish that keeps the property looking new over time for a longer repainting period.
• Optimized Drying Time - Drying time is optimized to emphasize on proper drying between each coat to ensure smooth and tough finish.
• Anti Fungal - Prevents unsightly growth of surface fungus to maintain beautiful and healthy wood.
• 100% Free from Lead & Mercury - Comply to Jotun's highest standards in health, safety and environment.
Type
A premium low odour gloss paint for wood and metal. This high quality alkyd enamel paint has outstanding durability with excellent colour retention.
Recommended use
Applicable for interior and exterior sufaces, suitable for both new or painted substrate.
Substrate
On wood and metal surfaces.
Directions for use
Surface preparation
• The substrate must be sound, clean, dry and free from dust, oil, grease, laitance etc. All traces of form release agents/curing agents must be removed. A light sanding with suitable abrasive material is recommended before application. Any resulting dust/loose particles must be removed.
• Primer:
- Gardex Primer:1 coat
- For new exterior wood surfaces
- Aluminium Wood Primer:1 coat
- Gardex Primer:1 coat
• Topcoat: Gardex Premium Gloss:2 coats
Recommended paint system
• Storage
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care.
Disclaimer
All product images shown are for illustration purposes only. Actual products may varies in term of size, type, brand, version, colour, and other relevant characteristics.