Descriptions
High-quality component polyurethane foam has excellent properties in bonding strength that adheres to a wide range of surfaces. Building insulation that can fill and enclose spaces between:-
- Roof tiles
- Concrete Slabs
- Wall Cavities
- Drilled Holes
- Frame Construction
- Gaps around windows
*Remarkable for its high expanding yield*
Features
- Excellent insulating properties
- Filling and sealing gaps
- Curing system
- Excellent insulating properties
- Installation of window and door frames
- Excellent mounting capacity and stability
- Excellent adhesive properties
Size
Direction For Use
- Shake can vigorously for 30 seconds before and between uses.
- Clean surfaces of dirt grease and dust. Protect adjacent surfaces with tape or plastic film.
- Remove the seal cap and put a clean nozzle spray
- Hold the cylinder upside down and dispense slowly. Fill openings only 50% full to allow proper expansion.
- The foam begins to cure after 10 minutes. Wait for 1 hour before doing the next step.
- Use a knife to smooth and trim excess foam. The recommended single-layer thickness is 5-8cm. Several layers may apply with a minimum of 12 hour gap.
- Overfilling and PU foam drops can be clean with paint thinner, acetone or nail polish remover
- For best result apply PU foam with recommended temperature from +5ºC to 30ºC.
